블로그로 돌아가기
비교 2026-11-16 groomersupplyhouse.com — Groomer Supply House 13 조회수

Coarse Blending Blade vs GSH #30: Which Cut Comes First?

Coarse Blending Blade vs GSH #30: Which Cut Comes First?

Compare the Andis Coarse Blending Blade and GSH #30 clipper blade: one blends and thins, the other cuts close. Learn the right order for your grooming routine.

These Blades Do Different Jobs

The Andis Coarse Blending Blade and the GSH #30 are not interchangeable. One is built for blending and thinning; the other delivers a very short, close cut. Choosing the right one—and the right order—depends on what you want the finished coat to look like.

Use the Coarse Blending Blade to soften lines and reduce bulk without taking off much length. Use the GSH #30 when you need a uniform, close trim, such as on sensitive areas or short-coated breeds. In a typical grooming routine, the #30 often comes first for close work, and the blending blade follows to smooth transitions.

What Each Blade Is Designed For

  • Coarse Blending Blade: Designed for blending and thinning pet coats. This is a finishing blade—it softens harsh lines and removes bulk rather than creating a close cut.
    Coarse Blending Blade
    Coarse Blending Blade
  • GSH #30: Provides a #30 cut length of approximately 1/50 inch (0.5 mm) for very short trimming. This is a precision blade for close work, ideal for sensitive areas or maintaining short coats.
    GSH #30
    GSH #30

Cut Length and Purpose Side by Side

  • Coarse Blending Blade: No specific cut length is listed in the catalog; it is described as a coarse blending blade for blending and thinning. Use it to reduce bulk and blend transitions, not to set a uniform short length.
  • GSH #30: Cut length is approximately 1/50 inch (0.5 mm). It is intended for very short trimming and detailed work on sensitive areas.

When to Use Each Blade in Your Grooming Routine

Start with the GSH #30 when you need a close, even cut—for example, on the paw pads, sanitary areas, or a short-coated breed. Because it cuts to about 0.5 mm, it removes length quickly and leaves a smooth finish.

Follow with the Coarse Blending Blade to blend the edges of that close cut into longer areas, or to thin out bulk in the coat without creating visible lines. The blending blade is also useful on its own for softening scissor work or reducing density on thick coats.

Practical Blending Tips

  • Work from short to long: Use the #30 first on areas that need a close cut, then blend the boundaries with the Coarse Blending Blade.
  • Use light, sweeping strokes: The blending blade is designed to thin and blend; short, repeated strokes help avoid removing too much coat at once.
  • Check compatibility: The Coarse Blending Blade is listed as compatible with Andis clippers (standard size). The GSH #30 is described as suitable for use with compatible clippers. Confirm your clipper model before ordering.

Compatibility and Brand Notes

  • Coarse Blending Blade: Compatible with Andis clippers (standard size). If you use an Andis clipper, this blade is a direct fit. For other brands, check compatibility first.
  • GSH #30: Manufactured by Groomer Supply House. This is a house-brand blade, so you are getting a product designed and backed by the store you are buying from.

What the Catalog Does Not Confirm

The supplied information does not list a specific cut length for the Coarse Blending Blade, nor does it provide detailed care or cleaning instructions for either blade. It also does not confirm compatibility with clipper brands other than Andis for the blending blade. If you need those details, check the product packaging or contact the manufacturer before use.

관련 게시글

Customer Service
홈
상품
장바구니
내 정보